271
Many people, when talking about a concrete fence, imagine gray concrete slabs. However, if you give free rein to your imagination and buy good material https://betonkharkov.com.ua/, it is possible to build a reliable and long-lasting fence, while beautifully finishing it. For example, use paint or finish with tile stone.
Advantages of fencing
What guides people choosing a concrete fence:
• long service life (only fences made of natural materials can last longer);
• durability;
• construction safety;
• ease of installation;
• high frost resistance;
• economy.
Fence posts can be made of wood, or metal pipes will be installed. However, it is preferable that the posts are made of the same material as the fence itself.
Construction in stages
The following materials are required for installation:
• concrete slabs;
• columns;
• gravel with sand;
• cement;
• rubble stone;
• water.
First of all, the perimeter of the future fence is marked. Next, mark the places where the pillars will be installed, while taking into account the dimensions of the plates. To install the columns, you need to prepare pits under them with a size of 50*50 cm and a depth of about 70 cm. Before fixing the columns, be sure to use a level. Next, the gravel mixture and cement are mixed in a ratio of 4 to 1 and the columns are poured with the prepared solution. After 3 days, the solution will set completely, and the work with the columns can be considered complete.
After these works, they begin to assemble the fence - with the help of a level, they install the plates in the grooves on the posts and fix them. In order to hide the void between the ground and the slab itself, soil is poured there.
An alternative option is a strip foundation. To do this, it is necessary to make and install a formwork with a width equal to the size of the column. Pour it with concrete mortar and level it. The slabs can be installed in a day, as soon as the solution hardens.
Preparation for staining and painting
Before painting the surface must be prepared. Namely:
1. Clean the surface from dirt and dust with a brush with stiff bristles.
2. Wash the plates with strong water pressure and wait for complete drying.
3. Prime.
4. Carry out staining.
There are special types of paint for painting concrete surfaces. Such paint will not fade in the sun and will retain its color for a long time. When working, it is better to use a spray gun - it is much more convenient than a roller or a brush, and it also significantly saves time. It is better not to paint in sunny weather, as the paint will dry much faster and streaks may remain.
Facing with artificial stone
Usually, such stones (imitation) are chosen for facing as:
• granite;
• marble;
• limestone;
• shellfish.
Working with stone is not so difficult. First, you need to decide whether it will be a natural or artificial material. At the beginning of the work, the surface of the stones and the fence are thoroughly cleaned. Then the armature is attached to the fence. A special mesh or a wire mesh can be used as reinforcement. Next, the mesh is plastered with cement mortar. Stones can be fixed a day later. Laying is better to start from the bottom. As soon as the installation work is finished, you need to fill the gaps between the material with grout or cement-glue solution. Finally, the surface is washed and treated with a water-repellent liquid.
Summing up, it can be said that installing a concrete fence is not that difficult. And it is up to the owner to do it himself or to hire a team. In any case, having chosen this type of fence, you can be sure that it will please the eyes for many years and will not hit the wallet hard.
