1045
If you are the owner of a plot of land, then, quite possibly, you have decided to abandon centralized water supply and have installed a well. In this case, you will have to take care of the issue of water purity. For this, it will be necessary to submit samples to the laboratory.
In what cases is it necessary to analyze the water from the well?
- purchase of land
- selection of a site for the construction of a new well
- deterioration of the health of family members
- before installing the filter system
- if large industrial or agricultural enterprises are located near the site
Assessment of water quality from the well by specialists
To obtain the most accurate results of the water analysis from the well, it must be submitted to a specialized laboratory. So, for example, LLC "UkrKhimAnalysis" https://himanaliz.ua/ will conduct a study of water from the well according to key parameters. The State Sanitary Regulations clearly state which parameters are subject to monitoring. This includes:
- organoleptic properties (turbidity, color, smell)
- pH indicator
- rigidity
- chemical oxygen consumption
- the content of chemical substances (potassium, calcium, sodium, iron, manganese, etc.)
- nitrates
- oil
- heavy metals
- phenols, etc.
All these indicators are very important for assessing the quality of well water. Exceeding the concentration of such harmful substances as, for example, phenols and nitrates indicates that such water can cause serious harm to health, so it needs to be cleaned. Chemical oxygen consumption is one of the important indicators characterizing the purity of water.
There are several most common reasons why well water may not meet the required standards:
- Improper arrangement or untimely cleaning of the water supply source.
- Depreciation of equipment
- Industrial and household waste
Sampling for the analysis of well water
For an objective assessment of the quality of water from a well, it is necessary to correctly select samples for analysis.
- collect water in a clean glass or plastic container (you cannot use bottles made from juice, sweet drinks, etc., even if they are clean)
- before sampling, the well is pumped for 1-2 hours
- fill the bottle to the brim and close it tightly
For chemical analysis of well water, a sample can be delivered to the laboratory within a day (provided it is stored in a refrigerator). Sample for bacteriological analysis - no later than 2-4 hours after collection.
Cost of well water analysis
After assessing the quality of the water from the well, specialists will give you the necessary recommendations: clean the well, replace the equipment, install a filter system, etc.
At UkrKhimAnalyz LLC, the cost of well water research varies depending on the number of indicators. "Basic" (for 20 indicators), "Extended" (30 indicators), "Maximum" (50 indicators), as well as bacteriological analysis.
