317
The interior decoration of the room should be sufficiently durable, but at the same time easy to install, so that no additional costs are required. Plywood is used for different purposes: it can be a simple rough finish, or it can be a finishing coating. At the same time, it should be taken into account that this material is quite demanding in terms of quality.
First of all, it is necessary to choose sheets with the correct texture, which will ensure an aesthetic appearance of the ceiling. It is also important that the sheets are resistant to rotting, moisture, and deformation. And of course, plywood must have good thermal insulation qualities. Therefore, it is important to pay attention to GOST and technical conditions when choosing. It is they that allow you to make a quality finish and use it for a long time. To buy inexpensive high-quality plywood, you need go to the website.
Criteria for choosing plywood
The material should be manufactured according to GOST. Pay attention to how the sheets are arranged so that they are parallel to each other. It is also important that the ends are treated in a special way - so the sheets will be more resistant to moisture. In addition:
- the size of the letter should be such that it can be easily unfolded;
- better if the sheets will have the same geometric parameters;
- in high-quality material, the sheet will be easily cut, and it will also be easily bent;
- sheets must be smooth, free of cracks and knots.
It is important to buy wood with a veneer thickness of at least 2 mm. Sheets with a thickness of at least 8 mm can be used for finishing ceilings. In this case, the ceiling will last longer. Sheets up to 8 mm thick are most often used in utility rooms.
Plywood application
This material is used for finishing walls, floors, and ceilings. Basically, plywood is used for the floor due to its strength and resistance to moisture and temperature changes. Plywood is a material that has many positive properties that make it indispensable in construction.
For walls, plywood with a thickness of more than 8 mm is most often chosen. Such thickness is enough so that the walls do not crack even after many years. If you want to make the walls stronger, order plywood with a thickness of 10 mm or 12 mm. Such plywood will cost an order of magnitude cheaper. Sheets of thinner plywood should be laid in two layers.
Plywood for floorboards usually has a thickness of 10. Sometimes there are types of plywood created for specific individual requests, for example, plywood specially intended for lining walls for painting. This is due to its resistance to temperature changes or mechanical damage.
