1041
Patch cords are a necessary accessory that is needed to connect the equipment during operation. They are used in various environments, as they have high quality and ease of use. This is due to the fact that they are a piece of high-quality wire through which data is transmitted. Order patch cord it is possible in the original version right now.
What should I look for?
It can be very different, so patch modules allow you to connect a cable with different resistance values and wave resistance. A patch cord is one type of patch cable, and twisted pair is another type. Therefore, it has special requirements.
- The cable should have good protection against mechanical damage so that it can be used in conditions of high humidity, dust and dirt.
- Depending on the application, the patch cord can be screened or not screened.
- They have a different coating, which is necessary to protect against the influence of electromagnetic oscillations. In addition, there are such types of cable that are intended for use in conditions of elevated temperatures, then it has a second coating with which it is able to withstand such operating conditions.
- A patch cord can have a thermoplastic coating, and then it can be used for work in an environment of elevated temperature.
For such an environment, a patch cord made of heat-shrinkable tubes with a wall thickness of 0,35 mm is used. With the help of such a coating, it is possible to provide protection against the influence of moisture, temperature changes and mechanical damage.
Basic standards
Most often, cables of category 5e or 6 are used, then special types of connectors are used. These can be plugs and sockets at the ends of the cable, they are called connectors. In addition, connectors that screw into connectors can be used. At the same time, the length of the cable may also differ.
It depends on the conditions in which it will be used, as well as on the properties of the cable. In the case of shielded patch cords, copper wire shielding is placed on its body, which additionally protects the cable from electromagnetic interference.
As a rule, a shielded patch cord is marked with a shielded cable. However, cables without a screen are often found. They are used where there is no need for protection against interference. However, the "patch cord edify" option is most often used. It provides high signal quality and its transmission over long distances.
