121
First of all, let's clarify that the consumables with which the printer is equipped are not filled completely, so they are not enough for a long time. As a rule, they are called starters and they contain 30-50% of their total volume.
The manufacturer gives a guarantee only for the printing of a certain number of copies, provided that each sheet is filled no more than 5%. A fill figure of 5% means printing on half of an A4 sheet in a standard font. Therefore, if your consumable is designed for 3 thousand pages, then by printing at 2,5%, you will get as many as 6 thousand printed sheets. But if only black squares are printed, then the consumable will end on 140-160 sheets. Specialists of our company "Greentex" greentex.kiev.ua/smogut can perform an accurate calculation of the potential of your cartridge and, if necessary, will refill it quickly and efficiently with a guarantee for their work.
Choosing between the purchase of a laser and an inkjet printer for work in the office, choose the laser version. Refill new models of lasers Epson MFP they produce prints no worse than inkjet devices, especially in black and white. And refueling lasts 10 times longer, and there are models that give out a thousand times more (you can find consumables designed for 30 thousand copies).
What matters most is what documents are being printed. To print graphic images, there is not enough toner for the calculated volume. Toner consumption also depends on the quality of the print. For example, printing documents in draft quality will require much less ink.
What parameters should be taken into account to calculate the duration of the print cartridge?
Calculate the volume of printing taking into account the number of pages per day. Home use implies a smaller number of prints, while in the office, on the contrary, the need to print documents increases several times. The required volume is calculated based on the analysis of how much paper you buy, plus a small stock. After all, it may happen that you will need to print more, or graphic printing will be added and there may not be enough ink.
Do not "resurrect the dead". If your printer already gives serious failures, then the consumables may not be "to blame".
Another important aspect is how many users will print on one printer. The greater the number of such employees, the sooner it will fail.
Calculate how many color copies you will print. After all, color cartridges are used up faster than monochrome ones, and refilling them is more complicated and expensive.
Know that you will not be able to refill the cartridge more than 6 times, no matter what you want! This is explained by the fact that most of the parts will wear out. It is useless to ask to refill a consumable designed for 20 thousand or more prints, for a similar reason. But if you still need to use them, it makes sense to restore them.
