How to use a jigsaw correctly

The tool that replaced the usual saw has long become a familiar component for the work of a wood craftsman, namely an electric jigsaw - https://storgom.ua/lobziki.html. The versatility of the device is such that it allows the craftsman to process not only wood, but also plastic, thin sheets of metal, as well as some other materials at hand without much effort.

How to use an electric jigsaw?

Before telling how to properly operate this instrument, you should briefly pay attention to its design features.

The shape of the instrument can be staple-shaped or mushroom-shaped. Regardless of the configuration, each of these types has:

• start button;
• fixative;
• sole;
• keys or levers for control;
• dust cloths.

The correct operation of a jigsaw involves the optimal choice of equipment, setting the speed of rotation of the engine and choosing the most suitable methods of functioning.

1. Equipment A large number of cutting elements are produced for jigsaws. The choice of saws in this case depends on the hardness of the material, the thickness of the workpiece, and also on the cutting process.
2. Administration. The speed of work is largely influenced by the pump, which is included if you need to cut dense wood. Figured sawing is carried out without connecting this option. It is not necessary to start work immediately at high speed. At the same time, it is also necessary to take into account the type of processed material - plastic "does not like" high revolutions, and not every metal will also be able to withstand increased speed.
3. Work methods. If you summarize the functionality of this tool, you can highlight three main actions that it can perform:

• Sawing in a straight line. This is the simplest method of processing parts. It is necessary to draw a line with a pencil on the plane to be processed, and slowly run a jigsaw along it. To increase the accuracy of work, it is recommended to use a laser and a parallel stop, which must be fixed on the frame of the device. In this method, pumping is allowed, as it is most suitable for carrying out work at high speed.
• Curved cut. This choice of jigsaw operation modes is exactly what it is actually bought for. The most important thing in the process is to take your time, and the marking must also be applied to the surface in advance. The jigsaw must be guided along the drawn strip, turning in places of bends with some advance. Elements with a small bend diameter should be processed with special care to avoid errors and defects.
• The tenderloin is open. The device copes with this task perfectly. In this case, masters who need to cut holes in the back panel of the cabinet, a recess in the countertop or sink, and many other things prefer to use an electric jigsaw.

Sawing at an angle

This function of the device applies to all the processes described above. However, cuts are made not perpendicularly, but at an angle of up to 45 degrees to the plane itself. this is usually done in those cases where there is a need to connect two parts "on the fly".

Some useful tips on how to properly saw with an electric jigsaw

In addition to observing safety techniques when working with this tool, it is advisable to remember the following:

• the working stroke of the saw must be from the bottom up - this way you can avoid chipping;
• use only sharp saws - it will be more convenient to work with an electric jigsaw due to the reduction of the sawing plane to the side;
• it is advisable to put thin elements on plywood to avoid them rattling during processing;
• use a cutting element with a special reverse tooth - this way you will also be saved from damaging the processed material.

It is actually not very difficult to use a jigsaw for wood, which functions from an electrical network. Even an untrained master with some practice will be able to easily handle the instrument, making his work much easier.