321
When a person buys an apartment in a new building, he chooses a finish: draft, pre-clean or clean. Pre-cleaning finish https://yut-komfort.kiev.ua/remont-kvartiry-v-novostroyke.html suitable for those who do not want to deal with the dirty part of the repair, but who are interested in creating the design of the apartment themselves.
What makes the pre-clean finish attractive:
• An apartment with a pre-finished finish is cheaper than a similar one with a finished finish.
• The owners of such an apartment are not limited in choosing the color of the wallpaper, the option of floor or ceiling covering, sanitary ware, etc.
• There is no risk that unscrupulous builders will replace paid materials with lower quality ones.
What is included in the pre-cleaning finish.
Before starting finishing, workers draw up a repair plan and purchase materials. Next, the finishing process begins. It is logical that the dirtier work is carried out first:
• Electricians install wiring. They run an electric cable around the apartment. At the same time, workers are not obliged to install sockets and switches, if there is no such clause in the contract.
• Plumbers install sewage and water pipes in the bathroom, kitchen, and toilet, prepare them for work, and install plugs. Plumbing equipment (faucets, sinks, toilet) is already installed during the final finishing.
• Radiators in apartments are not always installed during the construction of the house. In this case, the batteries are mounted at the stage of pre-cleaning.
• The surfaces of the apartment are prepared for finishing works: the ceiling is plastered and whitewashed, the walls are primed, plastered, puttyed. The concrete floor screed is included in the draft finish.
• At the final stage of pre-cleaning, repairmen install window sills and slopes, mask seams with foam. They install interior doors, if it is stipulated by the contract.
After the work is done, all that remains is to glue the wallpaper or paint the walls, lay laminate, linoleum or tiles, install the ceiling covering, move in and live in the apartment.
What should you pay attention to when viewing a finished apartment.
Workers install sockets and switches in accordance with the contract. Before viewing the apartment, you should once again familiarize yourself with its points. Plumbing communications must be fully ready for operation immediately after installation of the equipment.
The heating system, installed according to the regulations, has the following appearance: it does not go beyond the place intended for it, the batteries are at the same level from the floor and are attached to the bracket, they have a Mayevsky faucet.
The floor screed depends on how well the floor covering will lay in the future. The floor should be flat, without cracks and voids. A construction level and a hammer will help check the quality of the floor screed. Workers must glue the joints of the floor and walls with a special noise-insulating tape.
Wall decoration is done qualitatively, if there are no distortions, leaks, cracks or traces of tools on the walls. After preliminary cleaning, the ceiling should look good even without a special coating, the finishing material should not fall from it. Do not accept the job if there is at least one of the listed points: scratches on the windows, cracks between the window system and the wall, handles are difficult to turn, windowsills are not at the same level.
It is better to wait for the workers to fix the existing problems, than later to spend money on their elimination.
