332
Scissor lifts are a universal type of hydraulic equipment that is used both in warehouses and at technical service stations, in underground garages and parking lots.
It is popular in industry and production for overloading oversized and heavy objects.
Depending on the field of use, hydraulic scissor lifts are produced in the following types:
- Lifting tables. The most popular model used in many enterprises and warehouses.
- Parking lot. They are intended for lowering and raising cars when installing underground garages. Installation of the mechanism will increase the efficiency and capacity of the parking lot due to the absence of the need to build an entrance.
- Mines. A simple and inexpensive alternative to a freight elevator. It is installed in a special self-supporting mine. Installation is also possible in the existing one.
- Roller tables. Equipment of a special configuration, intended for solving production problems and ensuring fast loading of heavy products in warehouses. The tables are available with and without a drive for rotating the rollers. An ideal option for a room with a conveyor line.
- Dicotyledonous. The design is almost identical to traditional tables. The difference is that it is equipped with two pairs of scissors. The two-legged equipment raises the load to a height of about 8 meters, allowing you to save on the purchase of a stacker or other types of mechanisms.
- Low-profile. Compact equipment, which is mounted on the warehouse floor, asphalt. It is popular in those cases where it is not possible to equip a reception. The low-profile lift takes up a minimum of space and allows you to optimize the loading and unloading processes.
Permit documentation and registration with state authorities are not required for the installation of hydraulic lifts. Before operation, specialists conduct an inspection of the equipment, after which it is possible to start using it. Get acquainted with the assortment of scissor lifts on forstor.ua.
Lifts for service stations - the optimal solution to the task of repairing "iron horses"
How to carry out technical maintenance of the car, perform minor and major repairs of some parts and at the same time ensure the safety of the master while performing the work? The times when a jack and a viewing hole were the main assistants of a locksmith have long since sunk into oblivion. If in the first case the master does not get access to some details, then in the second case the execution of tasks is complicated by the presence of a narrow space and lack of proper lighting.
Hydraulic scissors lifts for service stations — the optimal solution to the problems of large and small workshops, service centers, etc. This is a compact device that raises the car to the required height. It is distinguished by its versatility - it can be used both for carrying out repair work and for adjusting wheels.
It is worth replacing outdated equipment with modern hydraulic scissor lifts for the following reasons:
- compactness — when folded, the equipment occupies a minimum of space and does not interfere with the work of employees, it is completely placed in the pit;
- safety — all scissor-type constructions are equipped with a system that prevents a sharp descent of the platform;
- universality — the mechanisms can be used indoors and on open repair sites;
- corrosion resistance — metal elements are covered with a powder-polymer composition that prevents the appearance of rust and protects the structure from mechanical damage;
- uniform lifting of the car, which ensures the integrity of all elements;
- affordable price;
- the possibility of choosing a configuration or ordering equipment according to individual parameters.
In addition, hydraulic lifts are equipped with safety options, namely stops, roll limiters, railings, fences, and so on.
The principle of operation of a car lift consists in the effect of a hydraulic cylinder on a system of levers (scissors). The pressure is applied by the power unit, which is part of the electric engine.
The safety of the equipment is ensured by special shut-off valves. With a sudden drop in pressure in the hydraulic cylinder, the platform does not break off, but slowly and smoothly descends. Such a safety system can prevent injuries to employees of the service center or workshop, allowing them to leave the dangerous place in a timely manner. Among the large variety of modifications, you can choose options with different sizes of ladders for lifting the car from the bottom or with a full drive.
