288
Despite all their strengths, wooden residential houses also have certain problems. One of them is not the longest operational period. After about 20 years of operation without full repair, a wooden house loses its former appearance and functionality.
It is possible to correct the situation if you cover the house with facade panels with a layer of thermal insulation. What should be done?
1. Selection of suitable materials
To insulate a wooden house, it is best to use mineral wool or extruded polystyrene foam. But the choice of facade panels is much wider. Of course, the owner can choose plastic or metal siding. These materials are inexpensive, but they have excellent strength and design characteristics.
A block house made of wood or an imitation of a beam will also be great. With their help, you can keep the wooden house almost the same appearance that it had before. Regardless of the selected materials, the repair technology will be the same.
2. Installation of the frame under the facing panels
The heat insulator and facade panels are supported on a frame assembled from wooden beams or metal profiles. Usually, these elements are installed vertically, so that the panels are then placed in a horizontal position. Fastening x at a height will help tower tour to buy which is possible in Kyiv.
3. Laying a heat-insulating layer
When using mineral wool as a heater, you must first provide a layer of wind protection, then place the slabs between the frame elements, and cover with a waterproofing film on top. If the owner chose extruded polystyrene, additional protection is not needed. After all, it does not deteriorate from moisture. The main thing is that there are no gaps left after thermal insulation work. Otherwise, all work on improving thermal insulation will be useless.
4. Installation of facing panels on the facade
Any variant of the facing panels begins to be fixed from the bottom of the walls. The first panel must be placed with the spike up. The panels are attached to the frame structure with self-tapping screws or staples. The corners where different panels meet remain the most unaesthetic elements of the cladding. In order to give the cladding a presentable appearance, decorative matching corners are additionally attached.
If the owner chose wood panels for cladding, he will need to carry out additional painting or varnishing. But with plastic or metal panels, it is no longer necessary to do any more work.
