360
The use of power tools in work is simply necessary nowadays. It is much faster and more convenient than with conventional tools. The main problem is that such a thing works only from sockets. That is, if you are unexpectedly left without electricity, which so often happens in private houses, the repair will continue to fail. But this problem can be solved with the help of an electric tool that works not only from the network, but also from an accumulator or batteries, which can be bought in the online tool store BUDCRAFT™.
There are enough such devices on the market. These include drills, screwdrivers, electric saws, jigsaws, grinders and many other tools.
Tools powered by a rechargeable battery are very convenient and practical to use, since when working with them, movements are not constrained by wires and there is no restriction on the distance from the outlet. True, it will not be possible to do without a power source at all, sooner or later the battery will discharge and it will have to be recharged using a special charger. For greater convenience when working, it is better to immediately get a spare battery so that you can work continuously: if one battery is discharged, you can immediately replace it with a charged one. Usually, it takes several hours to fully charge the battery. Do not forget that the new battery must first be fully discharged five to seven times so that the next time it is charged it will be charged to the maximum.
The main part of battery tools is represented by screwdrivers: screwdrivers and drills. Screwdrivers are the simplest devices that work from a 2,5 Volt battery. With the help of screwdrivers, you can only tighten screws and screws. One battery is enough to drive a hundred screws 30 mm long and 3 mm in diameter.
A two-speed electric drill is a more powerful tool. It requires 7-18 volt batteries to power it. But the output power is enough to drill a hole in any wood, stone and metal with a diameter of up to 10 mm.
A full charge will allow you to make approximately 100 holes with a radius of 3 mm in wood or 30 of the same holes in stone.
An electric wrench, or a screwdriver, is another irreplaceable battery device. Its main advantage is that without a battery it can be used as a regular wrench.
When working with battery tools, you should adhere to some basic rules:
– store the battery instrument in a dry place;
– protect the instrument from direct exposure to solar radiation;
- do not wet the instrument under any circumstances;
– do not overload the tool to the limit when the engine stops;
– a nickel-cadmium battery will last longer in its temperature regime, fluctuating in the range of +10-+40 degrees, so the battery should be stored in a warm place;
– charge the battery only with the help of a standard charger;
- in order for the battery to be charged to the maximum, it should first be completely discharged.
