Effective methods to remove mold from the bathroom

20.05.2024/01/00 XNUMX:XNUMX    580

The bathroom is the wettest place in the apartment, so most often in these conditions, fungus can appear on the surfaces of the walls and ceiling. However, mold not only spoils the appearance of the room, but also has a rather negative effect on our health. Therefore, it is necessary to get rid of it as soon as possible, and for this you can use both folk remedies and specialized ones.

Anti-mold in the bathroom

Since the problem has existed for a long time, chemists have found ways to fight the dangerous enemy. In modern stores, you can pick up products that remove mold forever. On sale there are both special preparations intended for the sanitary treatment of infected areas, as well as household universal means for a wide range of purposes.

Special drugs

Bactericidal drugs are powerless in the fight against microorganisms. They act on bacteria, not fungi. Therefore, antifungal substances are chosen for cleaning the bathroom. According to their composition, they are both water-based and oil-based. Some drugs are designed to destroy mycelium, while others are designed to create a film on the surface that prevents its emergence and development. When choosing a suitable tool, you need to take into account the material of the surface to be treated. Since the drugs contain powerful substances, it is important to follow safety rules. If it is a concentrate, then it must be diluted in the specified proportions. It is necessary to use rubber gloves, goggles and respirators when working.

Latest news:  How to wash roller blinds and do not have to remove them from the window

Folk remedies

Due to the lack of industrial preparations, you can use recipes that have been tested by the people. So, how to wash off the mold:

  • Copper sulfate. To remove mold in the bathroom, you can use a vitriol solution prepared by yourself. Preparation of the solution is standard: it is necessary to dilute 5 grams of copper sulfate in 50 liters of water. It is important to follow safety rules and use a respirator and seals. If possible, take the children out of the house while the surfaces are being treated. The walls and floor should be treated with a brush. It is better to take a small brush so as not to splash the product and so that it does not get on clothes or skin. It is necessary to apply a thicker layer in places where black spots of mold appear constantly. Wash off with clean water using a sponge after 3-3,5 hours. Then the bathroom must be ventilated.
  • Chlorine. Household substances based on it are effective in combating mold. They contain an aggressive component that destroys most fungi. Wash the bathroom well and ventilate.
  • Table vinegar, 6-9% solution is an excellent antiseptic. Wipe the problem area with a sponge or cloth soaked in undiluted vinegar, leave until completely dry. Then rinse the surface with water and ventilate the room well.
  • Borax powder. The natural mineral has good antiseptic properties. A moldy area can be cleaned with a mixture of 1 cup of borax and 2,5 liters of water. After complete drying, remove protruding crystals with a dry cloth. If the affected area is large, you can spray it with a solution of 1 cup of borax and 4 liters of water.
  • Baking soda is an excellent antiseptic. In addition, it is abrasive, which makes it possible not only to remove the fungus in the bathroom, but also to clean surfaces of dirt from soap, water and other traces. To prepare the remedy, you need to pour soda into a plastic container and pour vinegar. All surfaces should be cleaned with the resulting foam. Corners of the bathroom, seams between tiles, pipes and other hard-to-reach elements are recommended to be cleaned with a toothbrush. After use, the surface must be rinsed with clean water to wash off the soda, which forms white streaks and streaks when it dries;
  • Hydrogen peroxide. Inexpensive and non-toxic liquid that can be found at the pharmacy. This tool can be used to clean colored surfaces because surface whitening is possible;
  • Ammonia. It is well suited for processing dense hard surfaces (glass, ceramic tiles). It is diluted in a ratio of 1: 1 with water and applied to the wall with a sprayer or sponge. After a few hours, it can be washed off with water. It is not used for porous materials (wood, concrete, plasterboard).
Latest news:  Psychologists named the color of the eyes of the most insidious men