1393
The quality indicators of the laminate are checked in various ways, each manufacturer chooses the option suitable for him. The main evaluation criterion still remains the wear resistance of the upper layer. This characteristic is checked by the so-called "Taiber test".
How is the laminate tested?
Let's study in more detail the essence of the test. The operator selects a grinding wheel of a certain size (it is an abrasive tool) and presses it to the face of the product. Note that there is no specific quality control tool. Different enterprises use existing equipment. So, in some cases, different tests are conducted.
Thus, the grinding wheel is put into operation. The testers are waiting for how long the top layer of the coating will rub off. The number of revolutions (as a rule, 6000-20000) until the moment of wear is taken as an indicator of quality. Initially, at the first stage, they look at the signs of wear and tear, then evaluate the final phase (95% wear). The arithmetic mean is calculated between these data. Based on the obtained value, the laminate is assigned one or another class.
In the price list, on the price tag, only one of these marks can be indicated (for example, IP, FP or AT). For an ordinary buyer, such an abbreviation does not say much. But unscrupulous sellers can use your ignorance to their advantage, otherwise interpreting its essence.
It should be said that only its stability during abrasion will depend on the class of the coating. However, other characteristics (resistance to UV rays, moisture, impacts, temperature changes) are due to other factors. Pay attention to the listed values, they are indicated on the packaging by the manufacturer. To a large extent, the quality is determined by the material used for the production of the main layer, the type of locking joints, and the surface treatment. In good stores, this information is indicated in the description, for example https://enita.com.ua/category/laminat/
Laminate care tips
Laminate can be classified as a practical floor covering, in addition, it is characterized by high aesthetic qualities. The period of operation will last longer if the flooring is properly cared for. There is only one sure way to protect the flooring from premature wear - timely removal of all kinds of dirt and moisture. If water lingers on the surface for a long time, it will seep into the seams and cause damage to the material (although there are also moisture-resistant models).
For laminate care, beeswax and varnish are ineffective. They wear out the waterproof coating, which causes the coating to wear out before the allotted time. Dust and dirt are cleaned manually, but first you need to wait for the stain to dry. Use the usual one rag, soft sponge, vacuum cleaner. Carry out wet cleaning with caution: carefully wring out rags, remove excess water immediately and wipe the coating dry. Do not make special efforts to wash, the movements should be smooth.
