123
Door systems are ready-to-install interior doors that include the door itself, a box beam, a frame and sometimes, depending on the size, an expansion bar. Modern manufacturers offer a large assortment of doors, the quality of which models meets GOST standards. Canvas doors vary from four hundred to nine hundred millimeters. The height of the door is two thousand millimeters, the box beam is higher by one hundred millimeters, the platband is two hundred, usually for installing the door and completely hiding the opening, expanders are used, the sizes of which vary from eighty to one hundred and eighty millimeters. Installing a door is a matter that requires a certain level of professionalism. Especially if it is about installing a door with an expansion bar. If the width of the box and the door opening do not match, then longitudinal sawing is performed.
Even though there are interior doors http://dveri.com/catalog/dveri-mezhkomnatnyye/dveri-emal at first glance they seem similar, their quality characteristics are significantly different. The general classification divides doors into massive and frame doors. According to the type of raw material from which the doors are assembled, they are divided into several types.
Doors made of solid wood are considered the most expensive and exclusive. They are made to order, having previously discussed the dimensions of the doorway. Such doors will last a long time, as the latest technologies are used in their production, which include complex wood processing and mass stabilization,
Eurobrus or glued board is the material from which doors made of glued massif are made. Boards are sawn radially and longitudinally. This helps increase the moisture resistance of the door. For example, a good-quality hardwood can withstand soaking in water and drying more than once, while maintaining its external characteristics. Choosing a door made of glued wood should be approached carefully, since sometimes decent-looking doors can turn out to be made of rotten wood. By trusting proven manufacturers, you can avoid disappointment from the appearance of dark spots on the door.
The next type is veneered doors made of solid wood of such species as makkore, oak, walnut and cherry or budget options made by the type of frame production with veneer gluing. Veneered doors can withstand long periods of operation, provided they are installed correctly, and the thickness of the door, door hinges, and canopies are chosen correctly.
The most budget option is laminated doors. The light weight makes it easy to install the door, which is an advantage when choosing this option. The disadvantages include a fragile coating, a rather simple appearance and a short service life.
In-demand models include interior doors with PVC coating. Canvases of different shapes are covered with a PVC film. Such doors are resistant to external influences and their service life is quite long. The market of doors covered with PVC presents a wide choice to the buyer.
